FAG Angular contact ball bearing

Fag angular contact ball bearing can bear both radial load and axial load. It can work at high speed. The larger the contact angle, the higher the axial bearing capacity. High precision and high-speed bearings usually have a contact angle of 15 degrees. Under the action of axial force, the contact angle will increase. Single row angular contact ball bearings can only bear axial load in one direction, which will cause additional axial force when bearing radial load. And can only limit the axial displacement of the shaft or housing in one direction. If it is installed in pairs, make the outer rings of a pair of bearings opposite, that is, the wide end face to the wide end face, and the narrow end face to the narrow end face. In this way, additional axial force can be avoided, and the shaft or housing can be limited to the axial clearance in both directions

fag angular contact ball bearing can bear both radial load and axial load - combined load (single row angular contact ball bearing can only bear single direction axial load, so it is usually installed in pairs)

cage of fag angular contact ball bearing
the material of cage is brass Synthetic resin, etc. are distinguished according to bearing form and service conditions